SAMU's homepage

Sitemap

About Me
Picturebank
Photography
Articles
Equipment
Cameras
Lenses
Extenders
Extension Tubes
Adapters
Flashes
Accessories
Pentax
Reviews
Techniques
Digital Darkroom
Motorsport photos
Audio & Video
Links
News

Adapters for alternative lenses

Why?

There are many reasons why to use alternative lenses. Some use them because they have them from their old system. Some use for cheap price. And some use because of special characteristics alternative lenses can offer. Also some lenses offer quality that cannot be found from Canon lenses, e.g. Leica Summicron 90/2.0 APO and Carl Zeiss Distagon wide angles.

I use alternative lenses mainly for the characteristics and Canon's lack of capability to buid good wide angle lenses (I don't even need ultrawide...). Some of the Canon lenses have some characteristics, for example Canon EF85 f/1.2L USM Mark II or Canon EF135 f/2.0 L USM. However even these very fine Canon lenses lack some characteristics which I prefer, like good micro-contrast over whole frame or lack of chromatic aberrations, specially in areas outside depth of field where for example otherwise excellent Canon 85L really sucks with the pink fringe.

How it's possible

Canon EOS system has one of the shortest distances from lens mount to the film/sensor. Therefore it's possible to create adapters which will come between the lens and Canon EOS camera body. There are no optical elements, and the picture quality is as good as it is with the original camera into which the lens was designed for.

I have adapters for Nikon F mount, Contax/Yashica mount and Leica R mount. Below are pictures of them and they are in same order which I listed them:
Nikon F mount- , 
Contax/Yashica mount- and Leica adapters
There are adapters for other systems as well, like Olympus and M42.

Some lenses cannot be used in Canon EOS even there is adapter available. Reasons can be protruding things to mirror chamber and lens not having manual control for aperture (e.g. Nikon 14-24mm which many people would like to use in fullframe Canons).

How adapters are used

Since there is no electronical connection between lens autofocus and automatic stopping down of lens is lost. Therefore alternative lenses are not for mainstream. Also due to implementation of exposure metering of non-professional cameras exposure is not metered correctly when lenses are stopped down. I have listed below two procedures how I have used the lens.

Procedure with non-professional camera (20D, 40D, 5D etc.):
1. Set camera to M-mode
2. With lens wide open manual focus and measure exposure
3. Close down the lens to aperture you want to use
4. Calculate exposure at closed aperture from wide open measurement
5. Take photo

Procedure with professional camera (1D series):
1. Set camera to Av
2. With lens wide open manually focus
3. Close down the lens to aperture you want to use
4. Take photo

Adapter quality

Adapters can have many kind of quality problems. At least following can be problematic:
- adapter flatness (may result for example left side being less sharp than right side)
- adapter flare (better adapters are painted back from the part which is exposed to camera sensor)
- bad tolerances (adapter may not fit or is too loose to lens)

Fotodiox C/Y adapter bad quality

Fotodiox and no-brand eBay 
C/Y adapters
Even photodiox is supposed to be best of the adapters I wasn't very happy to their product. There was some play between the adapter and the lens. When lens was attached to adapter and adapter to camera I can move the lens about 0.5mm to up, down, left or right (in same plane as lens mount). Therefore I ordered cheap eBay adapter but problem with it was too thick and lenses could not focus to infinity. Therefore I needed to adjust the focus of my only C/Y lens Carl Zeiss Distagon T* 28mm f/2.8 to match the adapter.

2009-01-05 New adapters

I decided to change all my adapters to "happypagehk" adapters. Now my most used lenses have EXIF chip which is coded according to lens focal length and maximum aperture. I did take some photos with adapters and they seem to be working very well. When there was EXIF chip in the adapter it seems that exposure is metered more accurately.

Happypage adapters seem to be perfect in every way:
- right thickness; now my Leicas focus to infinity and Contax past infinity (I adjusted it to be used with too thick adapter)
- all (I did buy one C/Y, 2 Leica R and 2 Nikon F adapters) do have stop skrew
- side visible to mirror box is anodized to black
- mechanically better than any of my previous adapters

Adapters got to Finland pretty fast, specially considering that each adapter's chip had to be flashed to lens specific values. I made the order at 4PM GMT +2 31st December 2008 and got the adapters this morning (5th Jan - New Year and weekend in between). Packaging was pretty good as can be seen in photo below and each adapter included lens back cap.
Here is larger version of the image below.

Happypagehk adapters

Adjusting focus on some Carl Zeiss lenses

Lenses which focus by moving all the class front and back the correct position of infinity can be adjusted even with slightly too thick adapter. Here is how you can adjust it:
1. Remove the front part of the lens by turning it to anti-clockwise (it has threads, at least on CZ 28/2.8)
2. Adjust focus to infinity
3. Remove the four skrews which are available after the front of the lens has been removed
4. Move the focusing ring from infinity to 2m meters
5. Close the four skrews
6. Test and re-adjust if needed by repeating steps 2-6 and using your brains...

Adjustment of Carl 
Zeiss Distagon T* 28mm f/2.8 focus
Notice! The adapter has to have correct thickness if lens has floating elements, since by adjusting the moving lens group of such lens will introduce aperrations.

Adapters links (Link to parent category)

Pebble Place - C/Y adapters

Huuhaakuukausi 2nd, 2009